As an Amazon Associate I earn from qualifying purchases.
Kegco #ad - The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. Single faucet draft beer tower: featuring a beautiful standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. The standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
Pro series dual gauge regulator: easily measure psi and co2 volume and adjust co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. Includes detailed instructions: this kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you'll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser.
A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. Standard metal beer faucet wrench: this beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting.
Kegco #ad - Nsf-approved kegco kt85d-l "d" system keg couplers has a convenient lever handle design and is designed for use with all domestic brand American "D" system Sankey kegs.
Beer line. 3" diameter air-cooled chrome-plated metal draft tower comes complete with two NSF-approved chrome-plated metal faucets, two faucet knobs, and two 5' lengths of 3/16" I. D. Aluminum co2 tank made from high strength aluminum alloy, which is lighter than steel tanks and will not rust.
EdgeStar #ad - Freestanding use only; weight: 81. 6 pounds; 115 volts / 60 hertz, 105 Watts, 1. 5 amps. Can be converted to a fridge only with the included tower hole cap. Store up to a full sized half shell Sankey standard keg.
The probe, in that order, where you only need to pull the lever handle out and down, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs.
It is 5-1/4" in length, which makes it easy to use on any surface. It features an easy-to-use design, on the other hand, to couple the keg. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. 1. 5. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole.
Redwood Brew Supply #ad - Ensure that every pour from your draft beer tower comes out icy cold. Increase the lifetime of your kegerator with a beer tower cover. Ideal for double tap beer towers. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust.
Maintains icy cold beer towers: upgrade your beer dispenser with this simple to use Neoprene kegerator tower insulation sleeve. High quality material and build: crafted from high quality Neoprene with heavy-duty double stitching.
Our product reduces foamy pours and wasted beer. Minimize condensation: kegerator towers sweat. Beer warms rapidly as it travels through a poorly insulated beer tower. Even the first! end foam now: maintain a constant temperature throughout your kegerator system with a Keg Tower Insulator. 3” diameter and 11. 5” height. Easy to clean and guaranteed to last.
EdgeStar #ad - Stores up to a full-sized, half shell Sankey standard keg; Does not support use of Coors, Miller rubberized or other oversized kegs. Protective floor plate for added durability; Wire rack shelving; Dimensions: 35" H x 20" W x 26.
Coldtower #ad - Ip56 rated dust and water resistant 50, 000 hour 34 CFM BLOWER not a weak computer box fan like you will find in economy tower coolers. Costs next to Nothing to Run.
Factory injection molded Design Provides Durability and Protects Blower from Moisture and Icing. Professional 1a power supply with on/off switch and extra long 6 Foot Cord not a cheap cell phone charger with a 3 foot cord, like you will find in economy tower coolers.
Built with an 8500 rpm 9. 9 cfm blower motor, but only draws 1. 6 watts. Works with commercial or homebrew beer kegs. Includes a energy efficient power supply.
Coldtower #ad - Ip56 rated dust and water resistant 50, 000 hour 34 CFM BLOWER not a weak computer box fan like you will find in economy tower coolers. We have done our research, and allow ample return air into the kegerator. Upgraded 1/2" hose is the perfect diameter to supply a steady stream of cold air into the tower, resulting in inefficient cooling of the tower.
This is done to make customers think they are getting a deal. Factory injection molded Design Provides Durability and Protects Blower from Moisture and Icing.
Costs next to Nothing to Run. Larger diameter hoses, restrict the flow of return air into the kegerator, like those used in economy tower coolers, and the 1/2" hose coupled with our powerful blower will cool your beer tower better than any other tower cooler on the market!. Full 1 year warranty against defects on all units bought after 1-1-2017! Our prices are our every day prices. We do not run phony "sales" like our competitors.
BACOENG #ad - 2. 1. Chrome beer faucet with brass lever: featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
3. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. It always tell you working pressure and tank pressure with pinpoint accuracy. Handle d-system keg coupler: d-system keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs.
Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines. Metal beer faucet wrench: this beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. Dual gauge regulator: this unit weighs about 3 pounds and includes 2 rubber protective covers. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole.
1. Kegco
#adKegco BF STCK-NT Standard Tower Kegerator No Tank Beer Conversion Kit, Standard
#adPro series dual gauge regulator: easily measure psi and co2 volume and adjust co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. Includes detailed instructions: this kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you'll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser.
More information #ad
Lever handle keg coupler: this nsf-approved kegco kt85d-l d system keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. Standard metal beer faucet wrench: this beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting.
| Brand | Kegco #ad |
| Manufacturer | Kegco #ad |
| Height | 10 Inches |
| Length | 18 Inches |
| Weight | 10 Pounds |
| Width | 10 Inches |
| Part Number | STCK-NT |
| Model | BF STCK-NT |
| Warranty | 1 Year |
More information #ad
2. Kegco
#adNone, Kegco Dual Tap Tower Kegerator Conversion Kit
#adBeer line. 3" diameter air-cooled chrome-plated metal draft tower comes complete with two NSF-approved chrome-plated metal faucets, two faucet knobs, and two 5' lengths of 3/16" I. D. Aluminum co2 tank made from high strength aluminum alloy, which is lighter than steel tanks and will not rust.
More information #ad
Includes an empty 5 lb. Kegco standard dual tap tower Conversion Kit includes everything you need to convert a refrigerator or freezer into a dual tap keg dispenser. Kegco two product dual gauge regulator displays both PSI and CO2 volume and features a large, easy-to-use adjustment knob.| Brand | Kegco #ad |
| Manufacturer | Kegco #ad |
| Part Number | 3PSDTCK-5T |
| Model | 3PSDTCK-5T |
More information #ad
3. EdgeStar
#adEdgeStar BR2001BL Ultra Low Temp Refrigerator for Kegerator Conversion
#adMore information #ad
Does not support use of Coors, Miller rubberized or other oversized kegs. Temp range: low 30's to mid 40's; Casters for easy mobility;. Reversible door; UL listed; Protective floor plate for added durability.| Brand | EdgeStar #ad |
| Manufacturer | EdgeStar #ad |
| Height | 35.06 Inches |
| Length | 25.69 Inches |
| Weight | 81.6 Pounds |
| Width | 20.19 Inches |
| Part Number | BR2001BL |
| Model | BR2001BL |
More information #ad
4. BACOENG
#adBACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank
#adBACOENG #ad - Metal beer faucet wrench: you need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out.The probe, in that order, where you only need to pull the lever handle out and down, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs.
More information #ad
Chrome beer faucet with brass lever: featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. It is 5-1/4" in length, which makes it easy to use on any surface. It features an easy-to-use design, on the other hand, to couple the keg. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. 1. 5. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole.
| Brand | BACOENG #ad |
| Manufacturer | BACO ENGINEERING #ad |
| Part Number | P1303 |
More information #ad
5. Redwood Brew Supply
#adEasy to Use Beer Tower Cooler Accessory 3.0" Diameter Beer Tower, Perfect Fit for Kegerator Tap Tower, Neoprene Design, Kegerator Tower Insulator for Beer Tower
#adMaintains icy cold beer towers: upgrade your beer dispenser with this simple to use Neoprene kegerator tower insulation sleeve. High quality material and build: crafted from high quality Neoprene with heavy-duty double stitching.
More information #ad
Save electricity with little effort: the added insulation of a Keg Tower Insulator will reduce kegerator energy consumption. Unlike kegerator tower cooler chiller fans, our product takes only seconds to install. Our product reduces foamy pours and wasted beer. Minimize condensation: kegerator towers sweat. Beer warms rapidly as it travels through a poorly insulated beer tower. Even the first! end foam now: maintain a constant temperature throughout your kegerator system with a Keg Tower Insulator. 3” diameter and 11. 5” height. Easy to clean and guaranteed to last.
| Brand | Redwood Brew Supply #ad |
| Manufacturer | Redwood Brew Supply #ad |
| Height | 0.5 Inches |
| Length | 11.5 Inches |
| Weight | 3 ounces |
| Width | 3 Inches |
| Part Number | FBA_COMINHKPR131391 |
| Model | A-2 |
More information #ad
6. EdgeStar
#adEdgeStar BR2001SS Ultra Low Temp Stainless Steel Refrigerator for Kegerator Conversion
#adMore information #ad
5" d. For freestanding use only; Casters for easy mobility; UL listed for electrical safety. Reversible door; temperature Range: low 30s - 45° Fahrenheit. Can be converted to a fridge only with the included tower hole cap.| Brand | EdgeStar #ad |
| Manufacturer | EdgeStar #ad |
| Height | 35.06 Inches |
| Length | 25.69 Inches |
| Weight | 81.6 Pounds |
| Width | 20.19 Inches |
| Part Number | BR2001SS |
| Model | BR2001SS |
More information #ad
7. Coldtower
#adColdtower Kegerator Tower Cooler
#adFactory injection molded Design Provides Durability and Protects Blower from Moisture and Icing. Professional 1a power supply with on/off switch and extra long 6 Foot Cord not a cheap cell phone charger with a 3 foot cord, like you will find in economy tower coolers.
More information #ad
This is done to make customers think they are getting a deal. Their every day price is the same as their "sale" price. Full 1 year warranty against defects on all units bought after 1-1-2017! Our prices are our every day prices. We do not run phony "sales" like our competitors.| Brand | Coldtower #ad |
| Manufacturer | Coldtower #ad |
| Part Number | ST |
| Model | ST |
More information #ad
8. Stir-Plate
#adBeer Tower Cooler with 5 Faucet Caps Black
#adStir-Plate #ad - 9. 9 cfm is more than enough air to cool any beer tower ice cold! With our tower cooler, our very tiny but powerful 40 mm fan hangs down inside your kegerator and blows just the right amount of cold air into your beer tower and onto your beer shanks.Built with an 8500 rpm 9. 9 cfm blower motor, but only draws 1. 6 watts. Works with commercial or homebrew beer kegs. Includes a energy efficient power supply.
More information #ad
Works with any kegerator with a 3" or larger diameter beer tower - home built or store bought. Completely pre-assembled - no assembly required. Easy to install - just insert into your beer tower from inside your kegerator, zip-tie the hose to your beer line with the included zip-tie so it does not slip out, plug-in and you are ready to go.| Brand | Stir-Plate #ad |
| Manufacturer | stir-plate #ad |
| Part Number | OE-YX7P-N9A8 |
| Model | OE-YX7P-N9A8 |
More information #ad
9. Coldtower
#adColdtower Kegerator Super Tower Cooler with Rocker Switch Upgraded for MAXIMUM cooling
#adThis is done to make customers think they are getting a deal. Factory injection molded Design Provides Durability and Protects Blower from Moisture and Icing.
More information #ad
Professional 1a power supply with on/off switch and extra long 6 Foot Cord not a cheap cell phone charger with a 3 foot cord, like you will find in economy tower coolers. Their every day price is the same as their "sale" price. Costs next to Nothing to Run. Larger diameter hoses, restrict the flow of return air into the kegerator, like those used in economy tower coolers, and the 1/2" hose coupled with our powerful blower will cool your beer tower better than any other tower cooler on the market!. Full 1 year warranty against defects on all units bought after 1-1-2017! Our prices are our every day prices. We do not run phony "sales" like our competitors.
| Brand | Coldtower #ad |
| Manufacturer | Coldtower #ad |
| Part Number | SUPWR |
| Model | SUPWR |
More information #ad
10. BACOENG
#adBACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank
#ad3. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. It always tell you working pressure and tank pressure with pinpoint accuracy. Handle d-system keg coupler: d-system keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs.
More information #ad
4. A convenient knob style pressure dial that can be adjusted without tools. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines. Metal beer faucet wrench: this beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. Dual gauge regulator: this unit weighs about 3 pounds and includes 2 rubber protective covers. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole.
| Brand | BACOENG #ad |
| Weight | 5.07 Pounds |
| Part Number | 43237-2 |
| Model | 43237-2 |
More information #ad
