Top 10 Rubber Blender Ring – Blender Replacement Parts

As an Amazon Associate I earn from qualifying purchases.

1. 1st Choice

#ad

Rubber 3-Pack O-Ring Gasket Seal for Osterizer and Oster Models

#ad1st Choice #ad - Not compatible with Oster Pro 1200 and In2uitive blenders. Fits most Oster blenders. 3 pack of gaskets included. Fits most Oster Kitchen Centers. Sealing Ring only.

Brand	1st Choice #ad
Manufacturer	Gandhi - Appliances #ad
Height	6 Inches
Length	6 Inches
Weight	0.01 Pounds
Width	6 Inches
Part Number	50
Model	O-Gasket

2. Frienda

#ad

4 Packs Blender Sealing Ring Gaskets O-Ring Gasket Seal O-Gasket Rubber Compatible with Oster and Osterizer Blender

#adFrienda #ad - You will receive: 4 packs blender sealing ring gaskets in our package, enough for you to use and replace in daily life. Quality material: made of elastic rubber material, these o-gasket rubber gaskets are not only durable but also have good elasticity, long time for you to use.

Compatibility: these o-ring gaskets are compatible with oster kitchen centers and Osterizer blender; The gasket measures about 1. 95 inch/ 4. 95 cm in inner diameter and 2. 59 inch/ 6. 58 cm in outside diameter, please make sure size before purchasing. Well sealed design: with the rubber material, which is soft enough to allow a good seal, you don't need to worry about leaking, your original gasket may break from years of wear and tear, and this one is a nice replacement for it.

Bring you convenience: the rubber o-ring gasket is easy to install, saving you a lot of time, just replace the gasket part which is broken, making life more convenient.

Brand

Frienda #ad

3. Kuntorie

#ad

Blender Sealing Ring Gaskets O-Ring Gasket Seal O-Gasket Rubber Compatible with Oster and Osterizer Blender Models 4 Pack

#adKuntorie #ad - Not compatible: not compatible with oster Pro 1200 and In2uitive blenders. Size: outside diameter 6. 5cm/2. 56 inches; Inside diameter 4. 95 cm/1.

95 inches. High-quality materials: made of elastic rubber material, these o-gasket rubber gaskets are not only durable but also have good elasticity, long time for you to use. Compatible: this blender gasket is compatible with Cuisinart blenders, Oster and Osterizer Blenders, please check the model before you buy it. Note: before using please wash the Rubber Gasket with Soap & Water. Easy to install: no tools are needed for Seal Ring installation. Note: the brand mentioned is not working as trademark, just applied to demonstrate compatibility.

Brand

Kuntorie #ad

4. Adele Rolling

#ad

Replacement Rubber Sealing Gasket O Ring For Oster & Osterizer Blenders,3 PACK

#adAdele Rolling #ad - It also fits some Sunbeam Blenders as well. This listing is for a three3 pack of the Gasket Seal Ring for Most Oster and Osterizer Blenders. Brand new and high quality. Fits oster blenders that have the square pin on top of the blender. It will fit glass or plastic oster and osterizer jars.

Brand	Adele Rolling #ad
Manufacturer	imported #ad

5. Hushtong

#ad

4 x Rubber Gasket Sealing O Ring Gasket Replacement Parts for Ninja Juicer Blender,10 cm/ 3.94 Inch in Diameter,The thickness is 0.11 Inch/0.3cm-Hushtong

#adHushtong #ad - Easy installation, can replace juicer or blender original gasket. Package included: 4 x rubber Gasket For blade, O ring rubber seal blender gasket for Ninja juicer blender. Flexibleo-ring, convenienttoclean;Replacetheoldsealtokeepyourlidcleaningand leakproof. Betterprotectionoftheblenderandplayaroleinsealing;Itcanbeusedforalongtime. 10 cm/ 3. 94 inch in diameter, not suitable for all blender for Ninja, please check your model carefully before purchasing. Made of quality rubber material for durable use; Superior toughness, not easy to deformation.

Brand	Hushtong #ad
Height	0.39 Inches
Length	3.94 Inches
Width	3.94 Inches

6. DRELD

#ad

Blender O-Ring Gasket Seal Rubber Sealing O-Gasket Rings, Replacement for Hamilton Beach Pack of 3

#adDRELD #ad - Premium quality: strict quality control standards to build and test. Installation suggestion: unplug the blender before starting repairs. Application: a common replacement part, this seal sits between the top of the blade and the bottom of the jar.

Made by premium quality food grade rubber, easy installation, superior toughness, not easy to deformation, can replace juicer or blender original gasket. For this repair, you'll need a flat head screwdriver and a hammer. Compatible models: it will fit glass or plastic jars, and Not fit wave-station or wave-action models. Save much money off dealer prices. Not genuine, convenient to clean. Guarantee and service: the blade with gasket blender base bottom Cap and 2 rubber O ring replacement part completed with a One-year Warranty.

The drive coupler has a left-hand thread, so you need to rotate it clockwise or hit it to make it fall off and rotate it counterclockwise to make it firm. Perfect match and good choice for Direct replacement of original parts, but the quality is better than the OEM. If the bottom cap and rubber O ring once failed on your blender, simply contact us for a replacement or refund.

Brand	DRELD #ad
Manufacturer	DRELD #ad
Part Number	gaskets seals rubber replacement gasket
Model	gaskets seals rubber replacement gasket

7. CloudCUP

#ad

CloudCUP Replacement Parts 4 Pcs Seal Ring Rubber Gasket Replacement, Compatible with Nutribullet Blender 600 Watt / 900 Watt

#adCloudCUP #ad - Dimensions of a gasket installed into a blade: Outside Diameter - 3. 9 inch, inner Diameter - 3. 43 inch, width - 0235 inch. Compatible blade has Outside Diameter - 4. 05 inch and Height - 1. 57 inch. Check the dimensions of your blade to be sure.

Pay attention: please check that your seal ring gasket has the lip on both sides. Package include: blender replacement parts and Accessories - Seal Ring Gasket Replacement with Lip - 4 Pcs. Compatibility: seal ring gaskets replacement - blender replacement parts Series 600 / 900 - Compatible with NutriBullet Personal Blender 600 Watt and Compatible with NutriBullet Pro Personal Blender 900 Watt.

Please watch the installation video; this is the best way to replace easily. High quality silicone, BPA Free. Warning: before replacing the gasket, make sure you get out the worn gasket from the blade! This is the most common misunderstanding. 100% consumer satisfaction: for any reason you're not completely satisfied, please do not hesitate to contact us for a replacement or full refund.

Brand	CloudCUP #ad
Manufacturer	CloudCUP #ad
Height	0.4 Inches
Length	4 Inches
Width	4 Inches

8. BIDIHOME

#ad

Oster Blender Replacement Parts Refresh O Ring Kit Speed Blade Jar Base With 2 Gasket Blend Compatible 4961 4902 Blender Parts

#adBIDIHOME #ad - Oster blender replacement parts fits most most oster blender models Note - DOES NOT FIT: Oster Pro 1200 and Oster Versa blenders Replacement parts compatible with Osterizer blender too.

Full refound guarantee : we make no claims this is original oster manufactured replacement parts # 4961, 4902. This kit fits oem standard! please note, For any reason you‘re not completely satisfied, we will offer you a full refund. Customer is our main priority! . Aspas para licuadora oster. Small appliance parts & accessories. Same for oster 4961 ice blade replacement kit. High quality materials: hard plastic gear, rubber gasket ideal for crushing ice, stainless steel speed blade, make smoothies, and for all fully blended products. Refresh kit contains: oster blender jar base + high quality 4 point stainless steel blade + 2 Rubber seal gasket.

Brand	BIDIHOME #ad
Manufacturer	Tabakh #ad
Height	4.3 Inches
Length	3.9 Inches
Weight	0.25 Pounds
Width	4.3 Inches
Part Number	490261
Model	490261

9. joyparts

#ad

Joyparts 3 PCS Replacement Parts Rubber Sealing Ring Gaskets ，Compatible with Oster and Osterizer Blender

#adjoyparts #ad - Includes: 3 sealing rings. O-ring gasket seal compatible blenders: 006803-000-np0; 006803-000-n01; 006811-c00-np0; 006811-c00-n01; 006843-000-np1; 006844-000-np1; 006844-000-n01; 006844-np1-bg3; 006847-np1-bg3; 006878-000-np0; 006878-000-n01; blstcc-gfp-np1; blstcc-rfp-000; blstcc-rfp-n01, 006832-000-np0, 006845-000-np0, 006854-000-np0, blstmp-w15-np1, blstmp-w15-np1, blstMP-B15-NP0; BLSTMP-B15-NP1;.

Compatible blender jar: 124461-000-000, 083818-002-089, 084036-000-000 O-gasket rubber compatible blenders: blstmp-b15-n01; blstmp-r15-np1; blstmp-w15-np1; blstmp-w15-n01, 006812-027-np0; 006831-000-np0; 006831-000-n01; 006832-000-np0; 006832-000-n01, 006642-000-n01; 006642-000-np0; 006647-000-np0; 006647-000-n01; 006684-000-np0; 006684-000-n01, 006845-000-np0; 006845-000-n01; 006812-001-NP0; 006812-001-N01. Made in china.

Brand	joyparts #ad
Height	0.2 Inches
Length	2.3 Inches
Width	2.3 Inches

10. Boao

#ad

Compatible with Cuisinart CBT-500, 5 Packs Blender Gasket Replacement Rubber Gasket Seal, SPB-456-2B and Oster and Osterizer Blenders Grey, SB5600, CB600

#adBoao #ad - Suitable for: this blender gasket is compatible with Cuisinart blenders, please check the model before you buy it; Note: the brand mentioned is not working as trademark, Oster and Osterizer Blenders, just applied to demonstrate compatibility.

What you get: 5 packs rubber blender gaskets are packed together, can be applied for a long time. Size information: the outer diameter of rubber blender gasket is about 6. 6 cm/ 2. 59 inch, before buying, the inner diameter is about 5. 1 cm/ 2 inch, please check your blender size carefully. Material: the blender gasket replacement is made of rubber, soft and durable material for better sealing and prevent leaking of blender, reusable and non-toxic material for fruit juice making.

Functional: you can use them to replace the old or broken one, and this gasket is elastic and stretchable, please ensure optimal fit in order to prevent fall off when you removed the cover.

Brand	Boao #ad
Weight	0.63 ounces