Top 9 Metal Duct Pipe and Fittings – Clothes Dryer Replacement Vents

As an Amazon Associate I earn from qualifying purchases.

1. Vent Systems

#ad

4 Inch 3 Way Fitting Metal, Vent Systems 4'' Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan, Duct Hose Dryer Vent T Connector

#ad
Vent Systems #ad - Don't worry about leaking air after installation. At the same time, it can discharge air from each part in the ventilation project. The duct connector is a three-hole - 3 way connector with two branches.

With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. The dryer duct connector is seamlessly connected to achieve a good leakproof effect. It is small in size, so it doesn't take up space. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. It can be used outdoors and indoors, even if it is exposed to the sun and rain. It is suitable for hoses of 100 mm 4 inch. Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally, install the clamp and tighten the screw.
BrandVent Systems #ad
ManufacturerVent Systems #ad

2. REPA MARKET

#ad

T Shape, Y Shape 45 Degree, Duct Splitter for Exhaust Fan Dryer Vent Hose 3 Way Duct Hose Connector, T Joint Metal 4'' Inch

#ad
REPA MARKET #ad - This is a three-hole connector with two branches. The dryer duct connector is seamlessly connected to achieve a good leakproof effect. This connector is durable and long lasting. It is small in size, so it doesn't take up space.

The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.

Made of high quality metal, good toughness and easy processing. It can be used outdoors and indoors, it is a material with high strength, even if it is exposed to the sun and rain. At the same time, it can discharge air from each part in the ventilation project. With the features of environmentally friendly, safe and non-toxic. Don't worry about leaking air after installation.
BrandREPA MARKET #ad
ManufacturerREPA MARKET #ad
Part NumberTV100-100

3. Deflecto

#ad

Deflecto Aluminum Dryer Vent Elbow, 4", Fully Adjustable, Silver DE904

#ad
Deflecto #ad - Genuine Replacement Part. 4" diameter 90 degree aluminum duct elbow. Fully adjustable aluminum elbow from 0 degrees to 90 degrees. Whirlpool item. Manufacturer model # DE904. 4 sections riveted, each section machined together for full range adjustability, crimped at one end. Light gauge, most commonly used in clothes dryer or bathroom venting. Genuine replacement part, works with most major appliance brands.
BrandDeflecto #ad
ManufacturerDeflecto #ad
Height3.5 Inches
Length1.5 Inches
Weight0.2 Pounds
Width2.5 Inches
Part NumberDE904
ModelDE904
WarrantyEMW0041131

4. Vent Systems

#ad

Vent Systems 4'' Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan, Duct Hose Dryer Vent T Connector, 4 Inch 3 Way Fitting

#ad
Vent Systems #ad - It is suitable for hoses of 100 mm 4 inch. The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation.

With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally, install the clamp and tighten the screw. At the same time, it can discharge air from each part in the ventilation project. Made out of high quallity Metal it is a material with high strength, good toughness. It is small in size, so it doesn't take up space. The duct connector is a three-hole - 3 way connector with two branches. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance.
BrandVent Systems #ad
ManufacturerVent Systems #ad

5. Lambro

#ad

Lambro 244 Duct Connector

#ad
Lambro #ad - Light weight aluminum material for increased flexibility. Manufactured in United states. Highly durable. Portable and fits in most storage spaces. Easy to use. Connects 2 pieces Of 4 inch Flexible Aluminum Duct.
BrandLambro #ad
ManufacturerLambro #ad
Height4 Inches
Length4 Inches
Weight0.04 Pounds
Width3 Inches
Part Number244
Model244

6. Vent Systems

#ad

Duct Hose Dryer Vent T Connector, 4 Inch 3 Way Fitting, Vent Systems 4'' Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan

#ad
Vent Systems #ad - Made out of high quallity Metal it is a material with high strength, good toughness. The dryer duct connector is seamlessly connected to achieve a good leakproof effect.

Finally, install the clamp and tighten the screw. The duct connector is a three-hole - 3 way connector with two branches. Don't worry about leaking air after installation. At the same time, it can discharge air from each part in the ventilation project. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. It is small in size, so it doesn't take up space. Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. It is suitable for hoses of 100 mm 4 inch.
BrandVent Systems #ad
ManufacturerVent Systems #ad

7. GLIDESTORE

#ad

GLIDESTORE 4-Inch Hose Clamps Stainless Steel Adjustable 3 1/2-4 3/8” Diameter, 5-Pack Easy Turn Clamp, Ideal for Dryer and Plastic Vent Ducts, Easy Turn Thumb Screw Metal Clamp

#ad
GLIDESTORE #ad - Huge quantily, small cost: each package consists of 5 pack 4 inch hose clamps, the size of each clamp is about 4 inch Adjustable 3 1/2 - 4 3/8” Diameter. If you are dissatisfied with 4 hose clamp, drop us a message and we are certain to give you a full refund.

Amazing function: these hose clamps are used to lock the hose tightly with a view to preventing flow leakage. This hose clamps can be applied for dryer, tube, securing hose, fuel lines in domestic applications, automotive, pipe, cable, plastic vent ducts, boat, industrial and so on. High-end material: hose clamps stainless steel made of Stainless steel, constructed to resist scaling and corrosion and ensure long- term use. 100% money back guarantee: customer satisfaction is our utmost priority. Easy to use: can be simply loosened or tightened by using the adjustable handle without any other tools.
BrandGLIDESTORE #ad
ManufacturerGLIDESTORE #ad
Part Number1000
Model1000

8. Awenta

#ad

T Joint Metal 4'' Inch, Y- Shape, T Shape, Duct Splitter for Exhaust Fan Dryer Vent Hose 3 Way Duct Hose Connector

#ad
Awenta #ad - With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. It can be used outdoors and indoors, even if it is exposed to the sun and rain. This connector is durable and long lasting.

It is small in size, so it doesn't take up space. This is a 4'' inch three-hole connector with two branches. Made of high quality metal, it is a material with high strength, good toughness and easy processing. At the same time, it can discharge air from each part in the ventilation project. The dryer duct connector is seamlessly connected to achieve a good leakproof effect. With the features of environmentally friendly, safe and non-toxic.

The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification. Don't worry about leaking air after installation. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance.
BrandAwenta #ad
ManufacturerAwenta #ad

9. Deflecto

#ad

Silver, Deflecto 4” Duct Connector, Aluminum with Bead and Crimp, 3” long DAC4C

#ad
Deflecto #ad - Designed with a bead in the middle to give extra strength to your connection, which helps prolong use. Maximum working pressure of 80 psi; maximum velocity of 5, 000 FPM; Operating temperature range of -100 to 430 degrees F. Crimped ends allow for easy installation, simply slide the ducts over each end and fasten into place. For joining together round ducting, our 4” one piece aluminum duct connector is an ideal solution. Constructed of fire resistant aluminum.
BrandDeflecto #ad
ManufacturerDeflect-o Products #ad
Height4 Inches
Length3 Inches
Weight0.1 Pounds
Width4 Inches
Part NumberVENDAC4
ModelDAC4C
WarrantyAS LISTED